Review of Stromberg Carlson Replacement Standoff - 8535- Video
Hello, neighbors and friends, Steven here with etrailer.com. Today we're looking at the replacement standoff for your Stromberg Carlson Exterior RV Ladders. That's right, folks, this will replace one standoff for your Stromberg Carlson RV ladder. Top up here is adjustable. You can twist this screw in or out. Bottom here goes to full length. more
4/26/2024 1:03:44 PM
Review of Stromberg Carlson Replacement Foam Grip with Hardware - FP-1001-R- Video
Hello neighbors, this is Steven here with etrailer.com. We're looking today at this replacement foam grip with the hardware for your Lend-A-Hand Grab Handle. That's right, folks, this will replace the black foam grip on your Lend-A-Hand rail for the RVs, and it works with the Lend-A-Hand model numbers AM-200, 300, 533 and 800, and also the mini Lend-A-Hand AM250 and 255 models. It is constructed of a nice, long lasting, durable, durable blend foam. It's gonna include the bolt spring and the nuts with the locking nylon inside of them. So a very simple replacement part here today, folks, again, nice durable rubber and all your hardware needed. more
4/26/2024 12:55:17 PM
Review of Global Link Key 363 - 295-000142- Video
Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement key, specifically 363 for your global link RV locks. Now folks, this replacement key does work with your global entry RV doors, baggage doors, or vice lock. It is key to number 363. You can see that G363 stamped on the key there itself in the metal. You're gonna get quantity one and it's got this nice hard plastic purple cover over it, which makes it a lot easier to locate and find in your keying. more
4/26/2024 12:47:21 PM
Review of CURT Tow Bar Safety Pin - C19746- Video
Hello neighbors, Steven here with etrailer.com. Today, we're looking at the replacement safety pin for your CURT tow bar with adjustable-width arms. Now folks, again, this will replace one, quantity one, of those safety pins that came with that CURT tow bar with the adjustable-width arms. That part number of the tow bar is C19745. Now, I will pop up an image on the screen there, and in the bottom right-hand corner-ish, those two flat pieces, that's where this pins go in into those connection points. And a close up here, I'll get you the dimensions here in a second. more
4/26/2024 12:41:40 PM
Review of Fulton Replacement Pivot Pin - F500336- Video
Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement pivot pin for your Fulton coupler hinge kits. Now folks, this does simply replace the pivot pin for your Fulton 3" by 5" Fold Away Trailer Coupler Hinge Kits. It's a very nice pin. It's got the handle here for finger hole and the hole for the retainer clip to go through, and that cable wired hole all in place. Now looking at some measurements, the usable pin length is about 5-7/8", and the thickness is 5/8". more
4/26/2024 12:32:27 PM
Review of Valterra RV Waste Valves - TC96PB- Video
Hello, neighbors, Steven here with etrailer.com. Today we're looking at this Valterra cable with the valve handle that's eight foot long. So, folks, this eight-foot flexible cable here is gonna let you install your valve handle exactly where you want it, and it's gonna be allowing you to place it in a secure location where it's easy to reach for you. Now, the inner wire of this guy, it's constructed of stainless steel so you can be sure it's gonna last for a long, long time. You got the one end here that goes onto the valve itself. And while I'm speaking about the valves, this does work with the Valterra and the Bladex cable valves. more
4/26/2024 10:22:06 AM
Review of Demco Fifth Wheel King Pin Locking Plate - DM6026- Video
Hello, neighbors. Steven here with etrailer.com. Today we're talking Autoslide Locking Plates. So folks, this is a Demco Autoslide Locking Plate for your standard 5th Airborne Pin Boxes. Now what the locking plate is gonna do is it's gonna prevent your kingpin from pivoting inside your Demco Autoslide 5th Wheel Trailer Hitch. Now, this does work with your standard length 5th Wheel Airborne Pin Boxes, and it's a very simple bolt-on installation with the included hardware. more
4/26/2024 9:44:30 AM
Adarac Truck Bed Ladder Racks Side Rails Review- Video
Hi everyone, Aidan here with etrailer. And today we're gonna be taking a look at these accessory side rails for your ADARAC aluminum series ladder racks. This is gonna be one of the accessories you can add onto the rack to allow you to mount things up to the side while still leaving the bars open up top. Let's check them out. So a couple things to note with these is they are going to be length specific to your application. So these ones are confirmed fit for our five-foot bed Toyota Tacoma. more
4/26/2024 9:34:04 AM
Adarac Truck Bed Ladder Racks Accessory Bars Review- Video
Hi everyone, Aiden here at etrailer. Today we're gonna be taking a look at Adarac accessory bars for your aluminum series or pro series ladder racks. This is gonna give you two bars that extend front to back from the main sections of the ladder rack and allow you to attach different types of accessories like a rooftop tent. Let's check 'em out. Now, these accessory bars come in a number of different lengths for different truck beds, so be sure to check 'em out and find the right one for you. The set that we have on our five foot bed Tacoma here is not necessarily going to be the same fit for a six foot bed ranger or a six and a half foot F-150, so just make sure you find the right one to pair up with your ladder rack. more
4/26/2024 9:28:49 AM
Review of Demco Jack for Tow Dollies - DM11683- Video
Hello, neighbors, Steven here with etrailer.com. Today, we're looking at a wheel jack for your Demco Kar Kaddy Tow Dollies. Now, folks, this is what they call a sidewind jack. If you're not familiar, obviously, the handle here is on the side, and that's how you wind it up, so sidewind. If the handle was on top, it would be what they call a topwind jack. Now, this wheel jack will let you maneuver your tow dolly freely when it's not hooked up. more
4/26/2024 8:19:16 AM
Review of Ventline Replacement Fan Blade 6-7/8 Inch - BCD0409-00- Video
Hi everybody. Andy here with etrailer.com. Let's take a brief look together at this Ventline Replacement Fan Blade. Now this is going to replace one 6 7/8 inch exhaust fan blade on your 110 volt fan of your Ventline RV Range Hood. Now, on your screen, I am including the models that this is going to work with. This is going to work with your PH62 and PH73 series Horizontal Range Hoods, and these four blades are gonna rotate counter-clockwise. more
4/25/2024 2:30:34 PM
Review of Dexter Replacement Brass Connector - T4750300- Video
Hi, everybody, Andy here with etrailer.com. Let's take a brief look together at this Dexter replacement brass connector. Now, this is going to replace one brass connector for your Dexter disc brake actuators. And on your screen, I am including all of the models that this is going to fit. So as you can see there, this is going to fit the model 10, 20, 6, 60, 60 ZX7000, and the Aero 7500 Swingway. This connector is the direct replacement from Dexter. more
4/25/2024 2:00:52 PM
Review of Inno Aero Crossbar T Slot Mounting Hardware Cargo Box Platform - INBRP12- Video
Hi, everybody, Andy here with etrailer.com. Let's take a brief look at this aero crossbar T-slot mounting hardware for your INNO cargo boxes and platforms. Now, this adapter kit is going to let you mount an INNO cargo box or platform in the T-slots of your INNO aero crossbars. This is going to work with all Shadow and Wedge Series boxes as well as Stream Box. And this is also gonna work with your INNO Roof Deck Platform Rack. And you see those model numbers there. more
4/25/2024 12:51:32 PM
Review of B and W Custom Fifth Wheel Bracket Installation Kit - BWRVR2605- Video
Hello, neighbors. Steven here with etrailer.com. Today we're looking at the B & W Custom Mounting Brackets for your Patriot Fifth Wheel above-bed base rails. Now, folks, this is a custom kit, so make sure you're checking our fit guide here at etrailer.com. Top center of the homepage, enter your vehicle information where it asks you for your year, make and model, bed length, cab size, those kind of things, to make sure you're getting the right parts for your specific need and your specific fit. Also, keep in mind that the video could be outdated if it's a newer year than what you see. more
4/25/2024 12:00:51 PM
Review of ARB Base Platform Rack Recovery Kit - ARB69GR- Video
Hello neighbors, I'm Steve here with etrailer.com. Today we're looking at our ARB Base Platform Rack Recovery kit. That's right folks, so this is a kit. It's gonna help you carry all your recovery gear you need on your ARB base platform rack when you hit the trail. So starting off, you're gonna get a nice heavy-duty jack lift bracket. That's the one back here with this big guy here and this hardware right here in front of me. more
4/25/2024 9:07:57 AM
Review of ARB Eye Bolt Tie Down Anchors for ARB Base Platform Racks - ARB66ZR- Video
Hello neighbors. Steven here with etrailer.com. Today, we're looking at the Eye Bolt Tie-Down Anchors for your ARB Base Platform Racks. Now folks, these eye bolts will provide a nice tie-down point for securing cargo on your ARB base platform racks. So they'll simply come in a couple of pieces. You'll clamp them round those platform rack rail rungs, and then you'll just twist them tight according to the instructions. more
4/25/2024 8:49:30 AM
Review of Thule Replacement Rubber Strip Workman Aluminum Truck Rack Full Size - 853-3544-23- Video
Hi everybody. Andy here with etrailer.com. Let's take a brief look at this Thule replacement rubber strip. Now this is going to replace one rubber strip for your professional workman aluminum truck rack, the full size, and on your screen for your reference, I am including the model number of that truck rack that this is going to fit. And this rubber strip is the direct replacement from Thule. So what that means for you is you can trust that this is going to fit right in place of that original one that you had, whether that original one got damaged or maybe somehow misplaced. more
4/25/2024 8:46:51 AM
Review of Roadmaster Replacement Stabilizer Bar Tow Dolly With Electric Brake - RM-B001225- Video
Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this Roadmaster replacement stabilizer bar. Now this is going to replace one stabilizer bar for your Roadmaster Tow Dolly with electric brakes. And for your reference, I am including the model number of that Tow Dolly that this is going to fit. And again, you are going to receive just one stabilizer bar. more
4/25/2024 8:22:15 AM
Review of Thule Replacement Fastener for ProRide XT or Thule UpRide - TH27BH- Video
Hello, neighbors. Steven here with etrailer.com. Today we're looking at the Replacement Fastener for your ProRide XT or the Thule UpRide Roof Bike Racks. Now folks, this fastener will replace and secure the rack to the crossbar mounting hardware. So I'll throw that image up there of where this goes. And again, folks, this replaces a fastener for the Thule ProRide XT or the Thule UpRide Roof Mounted Bike Racks. more
4/25/2024 8:07:58 AM
Review of Pullrite Replacement Coupler Head Assembly OEX 5th Wheel Hitch Base - PUL39ZR- Video
Hi everybody, Andy here with etrailer.com. Let's take a brief look together at this PullRite replacement coupler head assembly. Now this is going to fit your PullRite OEX fifth-wheel hitch bases. And this does feature a self-locking hitch plate that's going to make for super easy hookup. The jaw closes, and the handle's going to lock automatically once the king pin is in place. And the precisely laser cut wraparound jaw components are gonna cradle your trailer's king pin 140 degrees for a secure tight fit, which is going to create less rattle, and give you more security than slide-bar jaws. more
4/24/2024 3:38:04 PM
Review of Swagman Replacement Fork Mount for Pick Up Truck Bed Mounted 2 Bike Carrier - SP484- Video
Hello, neighbors, Steven here with etrailer.com. Today, we're looking at the replacement fork mount for your Swagman Pickup truck bed-mounted two-bike carrier. That's right, folks. This kit here will replace the original fork mounts on the Swagman Pickup truck bed-mounted two-bike carrier. Now, if you need that carrier, I'll put the item number on the screen. It can also be used to add additional bike capacity to that rack. more
4/24/2024 3:10:30 PM
Review of Pullrite Replacement Coupler Head With Pin Box Adapter OEX 5th Wheel Base - PUL99ZR- Video
Hi everybody, Andy here with etrailer.com. Let's take a brief look at this PullRite replacement coupler head with pin box adapter. Now this coupler head is going to fit your PullRite OEX fifth wheel hitch bases and this does feature a unique two piece design that's going to allow for fast, easy coupling. This coupler is going to bolt around your trailer's kingpin to create a new connection point. So let me go ahead and just give you an overview of this here. So again, this is going to fit over your kingpin and it's gonna be a very simple install. more
4/24/2024 3:04:36 PM
Review of Thule Replacement Strap for Thule Caravan Quest Roof Mounted Cargo Bag - 853-5907- Video
Hello neighbors, Steven here with etrailer.com. Today we're looking at replacement strap for the Thule Caravan Quest roof mounted cargo bags. Now folks, this is one, quantity one replacement strap, 22 inches long by an inch and a half wide with the plastic hard buckle on it. And this is again the replacement strap for that Thule Caravan or Thule Quest roof mounted cargo carrier. So nice, like I said, nice heavy duty plastic on the buckle itself. Nice, thick, strong nylon webbing, the stitching, everything. more
4/24/2024 3:02:36 PM
Review of Thule Thule Square Bar Adapter for ProRide Roof Mounted Bike Rack - 1500050552- Video
Hello neighbors, Steven here with etrailer.com. Today we're looking at the Thule square bar adapter for your ProRide roof-mounted bike racks. So folks, this will adapt your Thule ProRide roof-mounted bike carrier for use on square bars. So again, quantity one, square bar adapter, (adapter thudding) full metal, nice steel, heavy duty. It's curved and form-fitted directly for that Thule ProRide mounted bike carrier. Direct replacement part from Thule. more
4/24/2024 2:55:22 PM
Review of SportRack Replacement Rubber Cradle Pad for SportRack 4 Bike Rack - SR05001100000- Video
Hello, neighbors, Steven here with etrailer.com. Today we're looking at the replacement rubber cradle pad for the SportRack 4 bike rack for the 1 1/4 inch and 2-inch hitches. Now, folks, this is a very simple replacement part, again, for the SportRack racks that I mentioned. It is gonna replace the soft rubber cushioning for those racks. And again, it fits the 1 1/4 inch and 2-inch hitches, the single arm tilting version. It will help prevent the bike finish from scratches and abrasions, and it's gonna include one rubber cushion with purchase. more
4/24/2024 2:50:02 PM
Review of Demco Tow Bar Braking Systems - Replacement Male Fitting - DM87YV- Video
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this replacement 3/8 inch male NPT fitting for the Demco Air Force One Spartan chassis jumper kit. Now this part here will replace the 3/8 inch male NPT compression fitting on your smart and jumper. On this end is a 5/8 inch by 18 female thread fitting. This is designed to fit the Demco Air Force one Spartan RV Chassis Air jumper kit, which is part number SM 6296, which we do sell separate on our website. more
4/24/2024 2:49:29 PM
Review of Thule Replacement Bolt - 915-068-054- Video
Hello, neighbors, Steven here with etrailer.com. Today we're looking at the replacement bolt for your Thule sidearm and a couple of different other carriers as well, the Thule Hull-a-Port as well. Folks, this is one replacement M6 by 80-millimeter carriage bolt, and it's gonna work with many different Thule carriers. I'll put them up there as well, and their item numbers. Again, this is just one, quantity one, replacement bolt, an M6 by 80-millimeter. It's a carriage bolt, so it's got the square tip there at the head that helps secure it in place. more
4/24/2024 2:32:59 PM
Review of Yakima Replacement Endcap for Yakima FrontLoader and ForkLift - Y8880188- Video
Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement end cap for the Yakima Front Loader or forklift roof bike racks with steel wheel trays. So folks, again, this is just the replacement end cap for those two racks I mentioned. Ill throw a picture up real quick. The far left of that image is where this is going. The end cap, so again, this only works with the steel wheel tray, so the front loader and the forklift. more
4/24/2024 2:28:24 PM
Review of Thule Replacement End Cap for T2 Bike Carriers - 853-7017- Video
Hello, neighbors, Steven here with etrailer.com. Today we're looking at a replacement plastic end cap for the T2 Thule bike carriers. That's right, folks, this is one replacement cap, again, quantity one, for the T2 bike carrier main support bar. Now I'll put them item numbers up on the screen in case you're not familiar with them. This guy, again, is just a nice heavy-duty plastic. It's a direct replacement part direct from Thule, so you can be sure it's gonna fit those bike racks that I listed. more
4/24/2024 2:20:42 PM
Review of Thule Replacement Lock Cylinder and Premium Key N217 - 1500004217- Video
Hello, neighbors. Steven here with etrailer.com. Today we're looking at the replacement lock cylinder and premium key for the Thule one key system, specifically key and core number N217. Now folks, this will replace the lock cylinder and the premium key for the Thule one key system. Again, key N217. You're gonna get one key and one lock core with the purchase. more
4/24/2024 2:15:46 PM
Review of Yakima Replacement SKS Lock Core for Yakima Racks and Carriers A145 - Y8771-A145- Video
Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement SKS Lock Core for the Yakima racks and carrier, specifically Core #A145. Now folks, if you're not familiar, SKS or same key system is a lock cylinder to lock all your Yakima products to be keyed alike, so you just use one key to unlock everything. And that being said, this does fit key #A145, just like the engraving here on the core, it says A145. That key is sold separately. You must purchase it separately. more
4/24/2024 2:09:20 PM
Review of Yakima Replacement SKS Lock Core for Yakima Racks and Carriers - Y8771-A137- Video
Hello, neighbors and friends, Steven here with etrailer.com. Today we're looking at a replacement SKS lock core for your Yakima Racks and carriers, specifically core number A 137. Now folks, you can replace or add one SKS or Same Key System lock cylinder to your Yakima system and get multiple ones to have all your Yakima products keyed alike. Now, as you can see on the engraving, it is A 137. Now, one thing I wanna mention there is no key included. You must purchase a key that's sold separately and the key number would match it A 137. more
4/24/2024 2:03:06 PM
Review of Yakima Replacement Yakima 1A Raingutter Tower - Y8810137- Video
Hello neighbors, Steve here with etrailer.com. Today we're looking at this replacement Yakima 1A rain gutter tower. Now folks, if you're watching this, more likely you're either replacing a worn out or broken part, or maybe you bought a used kit and you're missing a few parts and you need to get 'em, well, either way, we got you covered here at etrailer, this guy will clamp onto the vehicle rain gutter with the provided lip here that is adjustable. Once you tighten everything, it'll clamp on and it provides a nice base for the Yakima roof rack crossbars, and those will go through there. It does adjust to non-parallel rain gutters and it is lockable if you purchase the same key system or SKS cores, which are sold separately. Now with those cores, you can lock the towers to the vehicle's roof, so the attachment point here and everything will be locked where no one could get it on or off without a key. more
4/24/2024 1:57:19 PM
Review of Yakima Replacement Side Strap - 8880220- Video
Hello neighbors, Steven here with etrailer.com. Today we're looking at a replacement side strap for your Yakima KingJoe Pro, the Yakima QuickBack, or the Super Joe Pro trunk bike racks. So folks, I'll pop an image up here on the screen real quick of just one example of those. So again, this is just one, quantity one, replacement side strap for these trunk mounted bike racks. Now folks, as I mentioned, those do fit a couple different options. I'll throw those up there on the screen as well for you to look at and while we're doing that, I wanna point out, again, just one strap. more
4/24/2024 1:50:14 PM
Review of Yakima Lift Brackets - Y8860037- Video
Hello, neighbors. Steven here with etrailer.com. Today we're looking at the lift brackets for your Yakima ReelDeal or Big PowderHound and the PowderHound carriers. So folks, these brackets do provide just extra clearance for your equipment when used with your Yakima ReelDeal, Big PowderHound or the PowderHound carriers. They are a direct replacement for Yakimas, and those carriers must be produced after 2006 for these to work. Again, folks, it's gonna provide extra space of lift between the carrier itself and the roof of the vehicle, and it's gonna help fit larger skis, snowboard bindings, or even reels from, like, a fishing pole or something. more
4/24/2024 1:40:57 PM
Review of Thule Replacement M6 x 80mm Carriage Bolt - TH56NW- Video
Hello neighbors, Steve here with etrailer.com. Let's take a look together at a Thule replacement M6 by 80 mm carriage bolt for your Thule racks and carriers. So folks, again, just a simple replacement Thule bolt. It is an M6 by 80 millimeter carriage bolt. Carriage bolt's got that square head, under the head, rather, that'll lock it through a square hole on your racks and carriers, and that's what holds that from spinning while you attach the nut on the other side. Again, a direct Thule replacement part direct from Thule. more
4/24/2024 1:33:00 PM
Review of Yakima Thru Axle Skewer Adapter for Yakima WheelHouse - Y02110- Video
Hello, neighbors. I'm Steve here with etrailer.com. Today we're looking at the Thru Axle Skewer Adapter for your Yakima WheelHouse Bike Tire Carrier. Now, folks, here's the picture of that tire carrier, what it looks like. And this adapter that we have here today is gonna let you secure a wheel with either a 12 millimeter or 15 millimeter thru axle to your Yakima WheelHouse. Now you can buy that Yakima WheelHouse separately. more
4/24/2024 1:25:45 PM
Review of Yakima Replacement Hitch Bolts for Yakima Stick Up - Y8880131- Video
Hello, neighbors. Steven here with etrailer.com. Today, we're looking at a replacement threaded hitch bolt set for the Yakima Stickup bike racks. Now, folks, I'm gonna throw an image up here on the screen. That's what that Yakima Stickup looks like. So if you have that rack, this is the replacement threaded hitch bolts. more
4/24/2024 1:17:10 PM
Timbren Suspension Enhancement System Spacer Kit Installation - 2022 Toyota Tundra- Video
Hello neighbors, it's Brad here at Etrailer, and today we're taking a look at installing the Timbren rear spacer kit for the rear suspension enhancement on a 2022 Toyota Tundra. Now, these are gonna be a great addition if you've lifted your truck, have aftermarket suspension, or you want your Timbrens to engage quicker and reducing the amount of sag that your truck has while under load. If you've added Timbrens to your Tundra or you're planning on adding Timbrens, something that you're gonna want to consider is closing up the gap that this still has. Now, the factory downs bumper, it's kind of a laughable at how much of a gap it takes for it to close down and finally bottom out. And that's gonna really translate to a truck that sags quite a bit. And the Timbrens do a really good job of reducing that, and that's gonna give you a ton of different benefits across the board, whether it be handling, sway control, having better steering feel, better braking, and overall just less wear and tear on your suspension. more
4/24/2024 12:23:00 PM
Yakima JetStream Crossbars Roof Rack Rails Kit Installation - 2024 Kia Telluride- Video
Hi, I'm Matt with etrailer, and today we're talking about the Yakima Roof Rack on top of our 2024 Kia Telluride. Now this will be a great option for the Telluride, because the Telluride is mainly more of a vehicle for if you wanna drive around with your family. And if you are driving around with your family, you're probably gonna encounter at some point where you need to store some extra luggage. And if you are driving with a group of people, you're not gonna have any room for that. So that's gonna leave you two options. Either you use some type of hitch mounted accessory, or put it on top of your roof. more
4/24/2024 12:19:18 PM
Yakima HomeBase Large SUV Storage Drawer MOD Topper Review- Video
Hey, there, it's Evangeline here at etrailer, and today we have the Yakima MOD System Large MOD Topper. This is going to fit your large and extra large MOD HomeBases, giving you some extra storage capacity, some extra height. That way, we can carry your different cargo, but still have it safe, secure, but also accessible. (drawer clicking) If you're not already familiar with the MOD System, it's a storage organization system where you can install this into your vehicle, put your different cargo. And because of the different add-ons, (drawer thudding) you can then mix and match whichever accessory makes more sense for your cargo. So you first need a HomeBase. more
4/24/2024 12:15:59 PM
Review of Yakima Replacement Pads for Yakima Hull Raiser - Y8860030- Video
Hello, neighbors. Steven here with etrailer.com. Folks, today we're looking at the replacement pads for the Yakima Hull Raiser to Hull Raiser Aero Conversion Kit. That's right, so that's what that conversion kit looks like. If you have this, it's gonna replace the pads include there. You will get two pads here. more
4/24/2024 11:57:56 AM
Review of Yakima Replacement Rear Clamp Assembly - 8880208- Video
Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement rear clamp assembly for your Yakima ForkLift and FrontLoader bike carriers. Now folks, this does replace one rear clamp assembly on either Yakima ForkLift or the FrontLoader bike carriers. It does include the tray mount, the top pads, and the bottom arrow mount, the screw and the top fastener. So you got all those different pads, the fastener, you got the T nut here, retaining nut, and the the T nut there. So again, you would simply just unscrew this, let that pop out, put it over the bar, clamp it back down until it's tight, and then you're ready to go. more
4/24/2024 11:50:09 AM
Review of Thule Replacement Flange Bushing - 853-7011- Video
Hello neighbors, Stephen here with etrailer.com. Today we're looking at a replacement flange bushing for your Thule, or SportRack bike racks. Now folks, this simply replaces one of the flange bushing that came pre-installed in your Thule or SportRack bike rack. It works great as a guide for the assembly carriage bolts and it works with the Thule revolver, the T2, and the SportRack Ridge bike racks. I'll put the item numbers on the screen for reference. And getting some dimensions here. more
4/24/2024 11:42:14 AM
Review of Draw-Tite Gooseneck Hitch - Center Section - DT63TR- Video
Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this center section for the Hide-A-Goose Underbed Gooseneck Trailer Hitch, has a 30,000 pound gross towing weight capacity. Now, this heavy-duty hitch head will pair with a custom mounting kit to create a gooseneck trailer hitch for your application. Now, the mounting kits, the custom mounting kits we do sell those separately on our website. They are vehicle specific, so I would recommend to go to our website, use the fit guide, put in your year and model vehicle, and it'll show you the mounting kit that would be needed to install this onto your vehicle. This will give you complete truck bed access when you're not towing. more
4/24/2024 11:27:21 AM
Review of Lockrack Replacement Upright - LR75FR- Video
Hello neighbors, I'm Steven here with etrailer.com. Today we're looking at the replacement upright for the LockRack ladder racks. That's right folks, this will replace one of the uprights for the LockRack ladder rack. I'll throw an image above my left hand shoulder here so you can get an idea of what that rack looks like. You can purchase that rack separately, part number LR97FR. Now this simply attaches to the ladder rack base, and it's gonna include one upright. more
4/23/2024 2:00:03 PM
Review of Dexter Replacement O Ring for Oil Caps - DX97CR- Video
Hello neighbors, Steven here with etrailer.com. Today we're taking a look together at the replacement oil cap O-ring for your Dexter Oil Caps. Now I'm gonna toss a picture up on the screen here for you to take a look at. That's what those oil bath caps look like. Now, folks, this does specifically work with the 10,000 to 16,000 pound heavy duty axle caps and I'll throw that item number on the screen for the cap that this specific O-ring works with. Now, this O-ring does have an inner diameter of 3.487 inches. more
4/23/2024 1:40:44 PM
Review of Pullrite Replacement Base OEX 5th Wheel Trailer Hitch Ford - PUL87ZR- Video
Hi, everybody. Andy here with etrailer.com. Let's take a brief look at this Pullrite Replacement Base for OEX 5th Wheel Trailer Hitches for your Ford truck. Now this is going to fit your 2010 and newer Ford Super Duty trucks with factory installed towing prep package. And this is going to replace the base on your Pullrite OEX 5th wheel trailer hitch. And as you can see there on your screen, this is going to work with both Super 5th and Superlite hitch heads. more
4/23/2024 1:16:00 PM
Review of Kuat License Plate Holder for Kuat Piston Pro - KU69RR- Video
Hello neighbors and friends, Steven here with etrailer.com. Today we're looking at the license plate holder for your Kuat Piston Pro. That's right folks, this license plate holder is gonna keep your plate in full legal view while you're using your Kuat Piston pro bike rack. Keep in mind, not every state allows you to keep your license plate covered, so that's why they came out with this. You wanna make sure you're legal in all states you're traveling through. This does work with multiple item numbers. more
4/23/2024 1:03:02 PM
Review of Kuat License Plate Holder for Piston Pro X - KU49RR- Video
Hello neighbors and friends. I'm Steven here with etrailer.com. Today, we're looking at this license plate holder for the Kuat Piston Pro X. That's right, folks, this license plate holder is gonna let you keep your license plate in full legal view while you're using your Kuat Piston Pro X Bike Rack. Now it does work with multiple different racks, I'll put those item numbers on the screen for you. It is a simple bolt-on installation with the included hardware, wrench, and Allen key as well. more
4/23/2024 12:55:14 PM
